Tech News Today, Marshmallow Custom Rom, Huawei, Run Programs, Network, Chromebook, Bank Account

Senin, 24 Juni 2013

Location-Based Routing without Inbound Call Restrictions

Location-Based Routing without Inbound Call Restrictions - To all visitors of this blog, I say welcome and thank you for visiting the blog Tech News Today Look for all the things you need that are available on this blog. If not available, please leave suggestions and comments for the development of this blog. now we will discuss first about Location-Based Routing without Inbound Call Restrictions we have collected a lot of information from sources to create this article, so please see.

Articles : Location-Based Routing without Inbound Call Restrictions
full Link : Location-Based Routing without Inbound Call Restrictions

You can also see our article on:


Location-Based Routing without Inbound Call Restrictions

The February 2013 Update for Lync Server 2013 (CU1) added location-based routing to the Lync Enterprise Voice featureset. As described on Technet and various other blogs, location-based routing was designed to function in countries where routing calls over the WAN is not allowed.

Countries like US apparently have rather strict telecom laws saying any calls that exit the country must exit via the PSTN.  For instance, imagine your company has a Lync deployment in US and Canada.  As I understand it, if a user sitting in US wanted to call a Canadian PSTN number, it couldn't save on international toll charges by routing the call to Canada via the corporate WAN and exit to the PSTN via the Canadian Lync deployment. The converse situation would also not be allowed.  Whether this is because US wants the international toll charge revenue or for monitoring purposes, I don't know.

Prior to Lync 2013 CU1, companies faced with these requirements would be OK when users never moved from their assigned location.  For instance, if a Canadian user never went to the US office, and the US users always stayed in US, they would never run afoul of the rules. If a Canadian user did travel to US, their Canadian voice policy would still apply (unless the administrator moved the user temporarily to the US Lync server).  Their calls would route over the WAN to the Canadian Lync server, which is not allowed by US telecom rules.

Location-based routing was obviously added to Lync to deal with the "India problem".  You can see this in the Technet documentation on how to setup location-based routing.  All the examples use US, and if you follow the documentation explicitly, you will have an US telecom compliant Lync deployment.  If our hypothetical Canadian user travels to the US office, their calls will use the US Lync deployment, rather than use the WAN for least cost routing.  Inbound calls to the Canadian user's Canadian phone number will go to voicemail, because letting him take the call via the WAN would run afoul of the US dial rules.

So, this got me thinking. What if we want to setup location-based routing, but not worry about whether or not inbound calls can route over the WAN?  I can think of many situations where location-based routing is desirable. Any place where you have lots of mobile people going to different offices can benefit from location-based routing, especially in environments where bandwidth back to the user's home pool is lacking.

Luckily, I'm working on a Lync 2013 deployment that has that exact scenario in mind. The company has many mobile users who travel to far-flung offices with poor WAN conditions.  I wanted to see if we could implement location-based routing for this company, but without the restrictions on inbound call routing imposed if you follow the Technet documentation to the letter.

The documentation has you setting up all your sites and subnets, and then running the following commands (as per http://technet.microsoft.com/en-us/library/jj994036.asp):

  1. New-CSVoiceRoutingPolicy to create the routing policies and the PSTN usages assigned to it
  2. Set-CSNetworkSite to enable location-based routing for the site via -EnableLocationBasedRouting:$TRUE, and to assign the previously created voice routing policy
  3. Set-CSTrunkConfiguration to assign network sites and enable routing restrictions on the PSTN trunk, using -EnableLocationRestriction:$TRUE.
  4. Set-CSVoicePolicy to enable location-based routing for the users assigned to that policy, using -PreventPSTNTollBypass:$TRUE

We setup location-based routing as per the documentation with only ONE key difference...we didn't enable location-based routing on the trunks as per the examples given.  When running Set-CSTrunkConfiguration, we left out the -EnableLocationRestriction:$TRUE setting.

Technet's documentation on this particular setting seems to indicate not setting -EnableLocationRestriction to $TRUE would make location-based routing not work. In actual fact, this is the setting that stops inbound PSTN calls from working while a user is at a site where call routing restrictions apply (like US).

The setting that I THOUGHT would have allowed inbound calls across the WAN to work was Set-CSVoicePolicy -PreventPSTNTollBypass:$FALSE.  This setting is actually the one that controls which users will get location-based routing applied to them.  Setting it to false disables location-based routing for the users of that voice policy, as indicated by the wording on the location-based routing setup page. It does not actually prevent PSTN calls from reaching users over the WAN, as the Technet documentation on the command indicates.

We've tested this setup and it works as we had hoped it would. When users go to remote sites, their outbound calls use the local PSTN egress point, but inbound calls to their PSTN phone number still routes to them properly.

So, in conclusion, if you want to enable location-based routing without inbound call restrictions, don't use Set-CSTrunkConfiguration -EnableLocationRestriction:$TRUE, or conversely, use Set-CSTrunkConfiguration -EnableLocationRestriction:$FALSE if you've already set it to $TRUE.







information Location-Based Routing without Inbound Call Restrictions has been completed in the discussion.

hopefully the article we give the title Location-Based Routing without Inbound Call Restrictions can provide knowledge for you in living everyday life in determining the gadget that suits your needs.

you just read the article about Location-Based Routing without Inbound Call Restrictions if this article is useful for you and want to bookmark it or share it please use the link https://sihanandi.blogspot.com/2013/06/location-based-routing-without-inbound.html thank you and do not forget to comment if anyone.

Tag :
Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : Location-Based Routing without Inbound Call Restrictions

0 komentar:

Posting Komentar