Tech News Today, Marshmallow Custom Rom, Huawei, Run Programs, Network, Chromebook, Bank Account

Minggu, 26 Januari 2014

How To Add An In-Desk USB Hub To Your Desktop

How To Add An In-Desk USB Hub To Your Desktop - To all visitors of this blog, I say welcome and thank you for visiting the blog Tech News Today Look for all the things you need that are available on this blog. If not available, please leave suggestions and comments for the development of this blog. now we will discuss first about How To Add An In-Desk USB Hub To Your Desktop we have collected a lot of information from sources to create this article, so please see.

Articles : How To Add An In-Desk USB Hub To Your Desktop
full Link : How To Add An In-Desk USB Hub To Your Desktop

You can also see our article on:


How To Add An In-Desk USB Hub To Your Desktop

I've been trying to design a new desk/office for a long time but am never quite happy with it. One feature I know I'm going to want in my custom desk is a built-in USB Hub. Instead of waiting around until I have the perfect plan and time to build it I decided to purchase a 3" Belkin In-Desk USB Hub (model F5U402-03IN-KIT) while I was upgrading my PC and add it to my current desk.

I decided to mount the In-Desk Hub to the return of my desk. It solves a couple of problems I was having. First, it obviously gives me additional USB ports which are easy to access for the times I need to plug-in a thumb drive, camera, charge my bluetooth headset, etc. without having to reach around to the back of my computer. Second, it acts as a traditional desk grommet which allows me to run some cables from peripherals on top of my desk return to my computer chassis underneath it. I've been trying to be neater with my cable management.

The 3" In-Desk USB Hub kit comes with a 3" grommet, 4 port powered USB Hub that fits in the desk grommet, USB cable and power adapter.


The USB Hub will work without the power adapter being pulled and just off of the power from the USB port you connect it to. For devices that draw more energy, such as external hard drives, you can choose to plug in the Hub.

Belkin also makes a smaller 2" In-Desk USB Hub that fits into a 2" hole. It only has 3 USB ports but still has holes on the side to run cables.

I chose the Belkin because I've used their products in the past and have always been pleased. I saw another model that also

What You'll Need

Materials

  • Drill
  • 3" Hole Saw bit (or 2" if using 2" hub)

Step 1: Make the Hole

Start by determining where you would like to mount the USB hub in your desk top. The location should be convenient and not in the way of other items you plan on putting on this area of your desk. Also check underneath the desk to make sure there are no obstructions to interfere with the installation or cables.

Use the hole saw in your drill and make the hole. If possible it's best to start the hole from underneath but don't cut all the way through. Once the drill bit portion of the hole saw emerges on the desk top, stop drilling, pull out the hole saw and finish up the hole from the top. This will give you a cleaner cut. If you just drill from the top, like I did, the hole has some imperfections along the edge but these will be covered up by the grommet.

Step 2: Install the Grommet

Next, slide the grommet into the hole. It wasn't fitting very tight for me so I cut up a wide rubber band into 4 pieces and positioned them in the hole before sliding the grommet in to get a tighter fit.

There are a couple of indentations around the rim of the grommet. These need to be orientated so they are at the 3 o'clock and 9 o'clock positions. You can make minor adjustments from underneath after the hub is installed.

Step 3: Prepare Hub

It's much easier to feed the cables from the top than trying to make the connections from the bottom. Before mounting the USB hub in the grommet I attached the USB and power cables to the bottom of the hub. With the 3" Hub you can slide the power adapter through the grommet but I'm not sure if you can with the 2" version. 

I also like to label the adapter and end of the USB cable. It makes it easier to make changes in the future.

Step 4: Insert Hub Into Grommet

Carefully fish the power adapter and USB cable through the grommet then slide the USB Hub into the grommet. There are two tabs on the hub that fit into the left and right indents on the grommet. Once you have inserted the hub's tabs into these indents, twist the hub clockwise to lock it in place. 

If you're grommet isn't tight you may need to hold the bottom of the grommet from underneath.

Next just plug the hub into a  free USB port on the back of your computer and the power adapter into an outlet and you're set. Remember, the power adapter is optional. If you're not going to be using devices that require a lot of power you don't need to plug it in.



information How To Add An In-Desk USB Hub To Your Desktop has been completed in the discussion.

hopefully the article we give the title How To Add An In-Desk USB Hub To Your Desktop can provide knowledge for you in living everyday life in determining the gadget that suits your needs.

you just read the article about How To Add An In-Desk USB Hub To Your Desktop if this article is useful for you and want to bookmark it or share it please use the link https://sihanandi.blogspot.com/2014/01/how-to-add-in-desk-usb-hub-to-your.html thank you and do not forget to comment if anyone.

Tag :
Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : How To Add An In-Desk USB Hub To Your Desktop

0 komentar:

Posting Komentar