Home » Flashing Box » Octoplus JTAG PRO v 1.2.1 Setup Download

Kamis, 13 Oktober 2016

Octoplus JTAG PRO v 1.2.1 Setup Download

Octoplus JTAG PRO v 1.2.1 Setup Download - To all visitors of this blog, I say welcome and thank you for visiting the blog Tech News Today Look for all the things you need that are available on this blog. If not available, please leave suggestions and comments for the development of this blog. now we will discuss first about Octoplus JTAG PRO v 1.2.1 Setup Download we have collected a lot of information from sources to create this article, so please see.

Articles : Octoplus JTAG PRO v 1.2.1 Setup Download
full Link : Octoplus JTAG PRO v 1.2.1 Setup Download
Article Flashing Box,

Octoplus JTAG PRO v 1.2.1 Setup Download

Octoplus JTAG PRO Software v.1.2.1 is out!

With this Software update we are glad to present new advanced features and support of new devices.
On your numerous requests, we have released feature of repairing devices, which are based on MediaTek CPUs using scatter!
Also added new eMMC functionality - «Boot partition enable» and for Samsung eMMC flash chips - «Remove write protect» and «eMMC geometry edit».
In addition, added support for new Samsung, LG, Lenovo, Alcatel and Oppo devices.

Octoplus Box JTAG PRO Software v.1.2.1 Release Notes:
🐙 Added «Repair devices based on MediaTek CPU's using scatter» feature!
With this feature you can repair different devices via eMMC, which are based on MediaTek CPUs.
Old and new scatter formats are supported.

To repair such devices, you should perform the next steps:

I. If device eMMC is not damaged
Solder the necessary eMMC wires
Connect the device
Go to «Factory Repair» tab in the Software
Press «Repair devices based on MediaTek CPU's using scatter» button
Select proper scatter and necessary files
Press «Write partitions» button
Device repair is done
II. If device eMMC is damaged

If eMMC chip is damaged, you can replace it to similar Samsung eMMC chip.
You should have CID and know properties (Boot1, Boot2, RPMB partitions’ sizes) of eMMC, which you want to replace.

Connect Samsung eMMC to Box (via soldering eMMC wires or via eMMC adapter)
Press «eMMC geometry edit» button, enter necessary Boot1, Boot2, RPMB partitions’ sizes and set them
Write proper CID of eMMC, which you want to replace
Go to «Factory Repair» tab in the Software
Press «Repair devices based on MediaTek CPU's using scatter» button
Select proper scatter and necessary files
Press «Write partitions» button
After writing will be complete, replace device’s eMMC chip to programmed Samsung eMMC
Assemble the device and power it on. Device repair is done
🐙 Added «Remove write protect» feature for Samsung eMMC flash chips
🐙 Added «eMMC geometry edit» feature for Samsung eMMC. With this option you can set Boot1, Boot2, RPMB partitions’ size for Samsung eMMC
🐙 Added «Boot partition enable» - you can set, whether the device is not boot enabled or select partition, that will be enabled for boot (partition1, partition2 or User area)
🐙 Added support for the following models via eMMC:
Samsung GT-I9060I - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung SM-G531H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG F460K, F460L, F460S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (Thanks to Mr. Hoayeu105 aka AquaSta)
Alcatel One Touch 4030 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo P780 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo A390 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo S820 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo A1000F - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Oppo T29 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
🐙 Added support for the following models via USB
(note: these devices are already supported via USB in old Medusa Software, they are just revised and added to Medusa Pro Software):
LG D160 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG D280N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG D320N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG D410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
🐙 Improved erase operation (now it is up to 200 times faster)
🐙 Fixed some issues with CID edit
🐙 New features and improvements in "Content Extractor":
added possibility of restoration of deleted data (files, folders)! To find deleted data, select «Show deleted data» option in «Content Extractor» window and parse (read) data from device or file. Note: unfortunately, not all deleted data can be undeleted.
fixed errors with searching and displaying data
improved cashing process for video-files (in «Search media» window)
added more criteria for inner media-files search
fixed issue with window's hanging after some device been connected
fixed some GUI problems
🐙 Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software
Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update.
Non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.
It will be not possible to use new eMMC feature («eMMC geometry edit», «Boot partition enable», «Remove write protect») without updating Box firmware!
🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)

Download Octoplus JTAG PRO Software v.1.2.1

information Octoplus JTAG PRO v 1.2.1 Setup Download has been completed in the discussion.

hopefully the article we give the title Octoplus JTAG PRO v 1.2.1 Setup Download can provide knowledge for you in living everyday life in determining the gadget that suits your needs.

you just read the article about Octoplus JTAG PRO v 1.2.1 Setup Download if this article is useful for you and want to bookmark it or share it please use the link https://sihanandi.blogspot.com/2016/10/octoplus-jtag-pro-v-121-setup-download.html?m=1 thank you and do not forget to comment if anyone.